Your best source of information and news about drivers, windows vista and xp on the internet

January 4th, 2009

You are currently browsing the articles from MS Windows Vista Compatible Software written on January 4th, 2009.

Manual Removal of W32/QQPass.DCG.PSW Trojan

Manual Removal of W32/QQPass.DCG.PSW Trojan.
W32/QQPass.DCG.PSW is a Trojan. The Trojan will infect Windows systems.
The Trojan may be dropped by other malware or may be downloaded from remote website by other malware.
It may also be downloaded unknowingly by a user while visiting malicious Website.
This Trojan first appeared on October 24, 2008.
Other names of W32/QQPass.DCG.PSW Trojan:
This Trojan is also known as Mal/Heuri-E, TROJ_DROPPER.BZM, Trojan-PSW.Win32.QQPass.dcg.
Damage Level : Medium/High
Distribution Level: Unknown
No Removal Tool for W32/QQPass.DCG.PSW Trojan
Trojan Manual Removal Instructions

Recommend Removal from Safe Mode:

How to Start in Safe mode:
Restart your Computer, Press F8 Repeatedly, when your Screen turns on, Select Safe mode, press enter.
The Infected Files Can be Seen in these folders and names also Running in Tasks
End the Following Active Process Before Removal
  • %Windows\hjbh.exe
  • %Windows\bxfq.exe
  • %Windows\dfll.exe
  • %Windows\goti.exe
  • %Windows\gzei.exe
  • %Windows\jdzd.exe
  • %Windows\jvcn.exe
  • %Windows\ouyf.exe
  • %Windows\tlqi.exe
  • %Windows\wgon.exe
  • %Windows\wkxi.exe
  • %Windows\wwny.exe
  • %Windows\ybea.exe
    • If you have any of these files in running process from task manger, end the process before removal.
    • Note: if task manager is disabled, Download the following file, Click to Download - Enable Registry.reg
    • Open it with Regedit.exe [%system32\regedit.exe], then it Confirms Add to registry Yes or No, Confirm Yes, then click Ok.
Trojan Entries Manual Removal From Registry
Click Start, Run,Type regedit,Click OK.

Note: If the registry editor fails to open the threat may have modified the registry to prevent access to the registry editor.
  • Download this UnHookExec.inf, and then continue with the removal.Save it to your Windows desktop. Do not run it at this time, download it only.
  • After booting into the Safe Mode or VGA Mode
  • Right-click the UnHookExec.inf file and click Install. [This is a small file. It does not display any notice or boxes when you run it.]

The Trojan modifies registry at the following locations to ensure its automatic execution at every system startup:

UNKNOWN

Search Registry For Virus File Names listed above to remove completely,
Edit Menu - Find
, enter Keyword and remove all value that find in search.

Exit the Registry Editor,
Restart your Computer.

Recommended Removal Tools:
Kaspersky Antivirus or Internet Security (Shareware)
Spyware Doctor (Shareware)
AVG Antivirus (Freeware)
Killbox (Freeware)

Written by FireFly on January 4th, 2009 with no comments.
Read more articles on W32/QQPass.DCG.PSW and manual removal and removal of trojan and otherSoftware and Windows.

I Leica A Lot (Part 3)


Continued from Part Two

In Use

Prices

  • Leica M2 - £300
  • Leica MR Meter -  £30
  • Voigtlander Color Skopar 35mm f/2.5 - £120
  • Voigtlander LTM to M Mount adapter (35mm) - £40
  • Camera and Meter from MXV, Uckfield – www.mxv.co.uk
  • Voigtlander LTM-M Mount adapter, Robert White – www.robertwhite.co.uk

Most reviews of a Leica usually pour over the specifications, the actual piece of equipment itself. However, any camera is in effect a light tight box which controls the amount of light that comes in and goes on to expose the film or sensor behind it. A Leica is no different in this effect. If you put a 50mm lens on an automatic every bells and whistle SLR (e.g. a Canon EOS 3 or Nikon F6) and a 50mm lens on the Leica, put it in the field and shoot away, the majority of people will see little to no difference if the aperture and shutter speed; as well as the subject are the same. Like any camera, the Leica by itself does not take better pictures. Owning a Leica will not make you a better photographer by default of owning it. What it will do is avail opportunities that some cameras don’t open up, where the nature of a camera like a Leica is best suited.


A good example might be three people at a gig, a low light situation. The person with the 5 x 4 camera is not going to get far with sheets of film, so it’s not ideal in that situation. The next person is armed with a modern SLR, with auto focus. The positives for them are the ability to shoot in rapid succession a number of frames to capture the action. The down sides could be the mirror slap’s noise disrupting the atmosphere (not least the person next to you) and the auto focus mechanism giving up leaving you to manual focus which without a split prism could be a tricky feat at wide apertures. The third person has a coupled rangefinder, with a decent fast lens they should be able to focus accurately most of the time (particularly with wider angle lenses) and shoot in relatively rapid succession to capture the moment in hand.

At no point does this define that one of those cameras is better in all situations, for that situation, a quiet rangefinder has its positives. In another situation such as serious landscape work, a 5×4 view camera may well have the distinct advantage over the other two. Thus there should be no mistaking a Leica by itself is not a better camera because it’s a Leica. Rather it becomes a better camera, in the right hands and in optimal situations – and this applies to types of camera rather than brands per se.

So here’s a tip: your photos lack any purpose and meaning? I can almost guarantee that moving to a Leica all by itself won’t make you a better photographer instantly.

As a very quick review of the features side, the most important thing to point out is that by itself, the M3 versus M2 does not equate the M3 as being better because its designation is higher. They are both excellent cameras on a par and for most people the main difference is the frame lines. The M3 comes if as shipped with frame lines for 50mm, 90mm and 135mm lenses, whereas the M2 comes with 35mm, 50mm and 90mm – which I find infinitely more useful. Others I am sure can point out all the other differences but in a practical sense that is it. It is just important to clear up a quick misunderstanding that the M2 in some way is a lesser sibling to the M3.

Other features include shutter speeds from bulb to 1/1000th of a second, a manually reset frame counter, a frame line preview lever, a fully coupled rangefinder built in and on some M2s (not mine) a self timer. As you can see, there really isn’t much to talk about except to say that what features it has are well made and feel very sturdy. Apart from the self timer which some M2s do not have, the other difference might be the rewind mechanism. All M2s have the ‘old fashioned’ rewind knob opposed to a crank, which slows down the speed at which you can rewind the film once fully exposed; the difference comes in how this rewind mechanism is engaged. Some M2s have a little lever/switch much like other M’s, whilst some have a button that varies in itself. One type of button has to be pushed in and held in whilst rewinding and the second type only needs pushing in once but can then be released to rewind. In my case my M2 came with the lever/switch.

Ok now that slightly tedious part is out of the way let’s move on to the usage of the Leica M2. First up is loading film which whilst widely mocked by some, is not as difficult as some make out. The basic process involves taking off the base plate and the spool, feeding the leader on to the spool, loading the cartridge back into the camera, aligning the sprocket holes on the advance spindle and moving the advance lever forwards a little to pull the film taught. Pop back on the base plate and fire off two frames over the exposed piece of film and off you go. The process probably takes no more than a minute. Much longer than my EOS 3 that takes a matter of seconds.

The beauty of the Leica really comes down to being smaller and lighter than most SLRs, the fact you can change the lenses unlike a lot of compacts (such as the Olympus XA which whilst small, light and very quiet has a fixed 35mm f/2.8 lens, no bad thing in itself) and that it is quieter.

I have been using the Leica M2 with the Leica MR Meter, which helps a little with getting accurate exposures (the M2 is a meter-less body) especially indoors but outside you can generally rely on Sunny 16 once you have a good eye for light and the basic principles of exposure. There is another advantage to the MR meter, it has a nice large knurled shutter speed dial which couples with the M2’s otherwise quite small shutter speed dial. The latter is my biggest annoyance as it can be a little fiddly otherwise (compared to a Bessa, Zeiss Ikon ZI and a more modern Leica M.)

Being a meter-less body, some could fairly rightly point out that they may struggle to get the action, but if you shooting print film, you will have good exposure latitude of 2-3 stops in most cases so you can afford to get the shutter speed a little off. If however you are using the Leica where it excels and that would be street work, documentary (not fast moving e.g. Formula 1 racing!), portraiture and still life/landscape you shouldn’t need to worry about firing off tens of frames in quick succession. In the instances noted above, one light reading will suffice for much of your work until the time of day changes (in general.)

For shooting landscapes, the Leica has fulfilled all that it needed to by being lighter than my SLR, and coupled with the Colour Skopar 35mm f/2.5 lens I have received sharp and pleasing results. In terms of indoor based work say family events, the lighter weight of the M2 has allowed me to shoot perfectly sharp pictures down to 1/15th second which would have resulted in disappointing pictures on the EOS 3 in most cases. Perhaps the clearest sign that the M2 is working out is that overall I thoroughly enjoy using the Leica as a camera but most of all the pictures I have got from it are as reliably enjoyable as those I get from the EOS 3. The last thing I would want is for the standard of my pictures to go down.

My next purchase will be probably a 90mm lens for portraiture work alone for situations where I don’t want to poke an EOS 3 with my 70-200mm f/4L in someone’s face!

Of course there is only so much one can write about a camera and I feel that I have exhausted this one. There is no denying that using a smaller, more simple camera is enjoyable to me but this is not the case for everybody, some people want fully automatic everything cameras but that takes a certain amount of the enjoyment out of the process for me – but again some people will be happy enough with that.

There are a few foibles with the M2 and perhaps M system in general. The shutter speed dial is somewhat small when the MR meter is not attached as already noted. Also, the very lower right corner of the 35mm frame is slightly obscured by my Colour Skopar lens barrel. With a faster lens this would be even more the case. This however would be a complaint for many rangefinders. It takes a while to get used to the ergonomics (what exists of them) of the M cameras, they don’t fit as neatly into the hands to start with as the new R series Bessa cameras, or many modern SLRs. After a while you soon find a comfortable hold of the camera and that complaint passes out of the window. However these are minor annoyances.

So the ultimate result – is it any good for what it was purchased for: taking pictures. It is certainly discrete, so much so that for a lot of people it looks like nothing more than a compact camera and is not taken too seriously. This is actually a positive as people tend to relax more than they do when my EOS 3 is pointed at them. Immediately the assumption for the EOS 3 in my case is that it is a ‘professional’ camera therefore you must be composed and so forth. With the Leica candid work is much easier and the intimacy of the outcomes is apparent. Outdoors for landscapes, the results are just as pleasing as using my EOS 3. The main difference is on the EOS 3 I tended to use the spot meter almost exclusively to pick out the mid-tone in a landscape, instead I now use the MR meter or the Sunny 16 rule (and a combination of both.) The results have been great and that is what counts.

In summary, the Leica M2 is a well made light tight box. It is a pleasure to use and some will often cite that it doesn’t matter about the equipment and that the picture is king. This is largely true but you have to use equipment that you get along with and some pleasure does come from this. An M2 or a Leica in general is not a magic bullet, it’s certainly not perfect for everything but if the need is for a small, light and quiet camera with an interchangeable lens system – a Leica M can be perfect for that. In my case I was lucky to find one for £300 (approximately US $450 in December 200 8) and that is very much an affordable camera.

For further discussion about the Leicas and rangefinders in general, I recommend the excellent www.RangeFinderForum.com website which not only has plenty of active discussion to ask any questions; but also an excellent archive of thorough answers to previously asked common questions too.

Example photos to follow soon.

      

Written by lilserenity on January 4th, 2009 with no comments.
Read more articles on Leica and M2 and otherSoftware and Review and Photography and Photos.

Download New Windows 7 Beta Boot Screen for Windows Vista and XP

Here is Windows 7 Beta Boot Screen for Windows Vista and XP. Windows 7 contains a animated boot screen which is loved by everyone. I assuse u`ll like to have one for you on Vista or XP whatever you are using. "Killer7ben" and "TSR-Pr" have created boot screens(Not Animated) for Windows XP and Vista which look very similar to Windows 7 boot screen.
Download Windows 7 Beta Boot Screen for Windows XP
Download Windows 7 Beta Boot Screen for Windows Vista
[Via AskVG]

Written by ShaDow on January 4th, 2009 with no comments.
Read more articles on otherSoftware and xp and Windows vista tips.

Measuring up Windows 7’s new “super” taskbar

One of the most obvious changes you’ll see when you first boot into Windows 7 is the new taskbar dubbed the “superbar”. Most people like it, some don’t, but I think overall its a large improvement over that little strip of screen real estate which has not had a major renovation since Windows XP.

For some users, one hurdle of the new “superbar” is its enormous size, or so it appears. To set the record straight, I conducted a little side-by-side experiment with two quick-launch items and two active applications on both Vista and Windows 7. Together with a measuring tape in one hand and a magnifying glass in the other, I counted. Soon enough, I grew impatient and resorted to Photoshop instead. Here’s how they measured up.

w7superbarmeasure

In conclusion, some interesting findings. The Windows Start “pearl” button actually shrunk by about 8 pixels. Quick launch items are given more than twice the width and three times the width with Windows 7’s small and large icons respectively. Application buttons have relatively remain unchanged from Vista (and do not change in width with small icons), at the same time appearing much more elegant.

In summary, if you want a taskbar experience as close to Vista as possible in terms of real-estate, then enabling “small icons” will get you there. On the other hand, the default “large icons” won’t kill you either. In fact, if you don’t pin anything to the taskbar, then you’ll only lose 2 pixels per application whilst gaining 8 pixels from the Start button. What will you ever do with all those extra pixels.

Written by Long Zheng on January 4th, 2009 with no comments.
Read more articles on otherSoftware and blog.

Yum

Yum is one of the newer methods of software management on Linux systems. It is basically a wrapper program for RPM, with great enhancements. It has been around for a while, but it has become more widely used and more prominent because major Linux vendors decided to concentrate on their (more profitable) commercial product offerings. Yum has changed and enhanced the traditional approach to package management on RPM-based systems. Popular large sites that serve as repositories for open source software have had to retool slightly to accommodate “Yumified” repositories. According to the Yum project’s web page: “Yum is an automatic updater and package installer/remover for RPM systems.

It automatically computes dependencies and figures out what things should occur to install packages. It makes it easier to maintain groups of machines without having to manually update each one using RPM.”

This summary is an understatement. Yum can do a lot beyond that. There are certain new Linux distributions that rely heavily on the capabilities provided by Yum. Using Yum is simple on supported systems. You mostly need a single configuration file (/etc/yum.conf). Other configuration files may be stored under the /etc/yum.repos.d/directory that points to the Yum-enabled (Yumified) software repository. Fortunately, several Linux distributions now ship with Yum already installed and preconfigured. Fedora is one of these distros. To use Yum on a Fedora system (or any other Red Hat–like distro)—to install a package called gcc, for example—at the command line, you would type

[root@fedora-serverA ~]# yum install gcc

Yum will automatically take care of any dependencies that the package might need and install the package for you. (The first time it is run, it will build up its local cache.) Yum will even do your dishes for you (your mileage may vary). Yum also has extensive search capabilities that will help you find a package, even if you don’t know its correct name. All you need to know is part of the name. For example, if you wanted to search for all packages that have the word “headers” in the name, you can try a Yum option like this:

[root@fedora-serverA ~]# yum search headers

This will return a long list of matches. You can then look through the list and pick the package you want.

By default, Yum tries to access repositories that are located somewhere on the Internet. Therefore, your system needs to be able to access the Internet to use Yum in its default state. You can also create your own local software repository on the local file system or on your local area network (LAN) and Yumify it. Simply copy the entire contents of the distribution media (DVD/CD) somewhere and run the yum-arch command against the directory location

Source of Information : McGraw Hill Osborne Media Linux Administration A Beginners Guide Fifth Edition

Written by magakos on January 4th, 2009 with no comments.
Read more articles on otherSoftware and Linux.

Windows 7 : TimerNuke Uninstall and Removal Script for Windows 7 and Server 2008

TimerNuke is not a very good activation crack for Windows 7 and Windows Server 2008. In fact, it’s not actually an activation crack too. For user who wants to uninstall and remove TimerNuke crack, use the following TimerNuke uninstallation script, aka Windows 7 & 2008 Activation Enabler.

Download UninstallTimerNuke.zip (mirror)

Run the UninstallTimerNuke.cmd to restore the files removed and re-enable the services stopped. Note that the uninstallation of TimerNuke will only work if you don’t delete the .bak backup files created. As with TimerNuke, TimerNuke Uninstaller only supports Windows 7 and Windows Server 2008.

Tip: The uninstall script also works to reset and restore activation components on many other so called Windows 7 ‘activator’, Windows 7 ‘activation crack’, PlusPatch, All Versions PlusPatcher and other imitates that based the work on TimerNuke, i.e. removing activation files and services.[Via Digital Life]

Written by ShaDow on January 4th, 2009 with no comments.
Read more articles on Windows 7 Activation and Windows 7 Tips and otherSoftware.

« Older articles

No newer articles