Building a 2-Node Server Core Failover Cluster建設一個2節點服務器核心故障轉移群集
If you have ever set up a Windows cluster in Windows 2003, 2000 or if you were brave enough NT4 you know it has always posed a number of challenges that usually required some specialized skills. Well in Windows Server 2008 that has changed thankfully and we can whip together a two node failover cluster in minutes! Before you get started you will need the following:如果您曾經設立了一個Windows群集在Windows 2003年， 2000年，或者如果您有足夠的勇氣NT4你知道它總是提出了一些挑戰，通常需要一些專門的技能。那麼在Windows Server 2008年的變化，改變了令人欣慰的，我們可以鞭子一起兩節點故障轉移群集分鐘！在您開始之前，您需要以下內容：
- 3 servers at minimum (1DC, 2 Nodes)第3服務器上最低（ 1DC ， 2個節點）
- Shared storage (iSCSI or FibreChannel)共享存儲（ iSCSI或光纖通道）
- 3 Networks (Public, iSCSI, Heartbeat)三網（公眾， iSCSI的，心跳）
With that in place the first thing to do is get the cluster role installed on both nodes. On Sever Core you can do that with the following command (case sensitive):在這方面發生的第一件事做的就是集群的作用上安裝兩個節點。論的核心服務器，您可以做到這一點與下面的命令（區分大小寫） ：
OCSETUP FailoverCluster-Core OCSETUP FailoverCluster核心
We can verify that the install was successful with the following command (case sensitive):我們可以確認是成功的安裝與下面的命令（區分大小寫） ：
OCLIST OCLIST
With that complete launch the Failover Cluster Administrator MMC from the DC and click on Create a Cluster under the Management section.與完整的啟動故障轉移群集管理員MMC中的直流，然後點擊創建一個集群下的管理科。
Add the two servers that will act as the cluster nodes…新增兩台服務器，作為群集節點...
…and perform a validation. You don’t have to perform one but it is a best practice to ensure everything is configured properly and it is required to get support with your cluster from Microsoft. It is also a handy troubleshooting tool to boot! ...並進行驗證。您沒有執行，但它是一個最佳實踐以確保一切正確設定，要求它得到您的支持與微軟的群集。這也是一個方便的故障排除工具開機！
Once the validation is complete and everything checks out, give the cluster a name and set the IP address. This is the public IP that clients will use to connect.一旦驗證完成，一切檢查的，給予群集的名稱和設定的IP地址。這是公網IP ，用戶端將用來連接。
Confirm the settings and click Next to start the cluster creation.確認設置，並單擊下一步以啟動創建群集。
Once complete you can view the report and the install summary.完成後，您可以查看該報告，並安裝簡易。
That is it! You now have a 2 node failover cluster installed! Don’t believe it is that easy? Check out the TechNet Virtual Labs below and do it yourself!這就是它！您現在擁有一個2節點故障轉移群集安裝！不要認為這是很容易？查看TechNet的虛擬實驗室下面做自己吧！
For more information see:欲了解更多信息見：
TechNet Virtual Lab: Creating a Highly Available Infrastructure TechNet的虛擬實驗室：建立一個高度可用的基礎設施
Written by rodney.buike. 撰稿rodney.buike 。 Read more great feeds at is source 閱讀更多的是供稿源 WEBSITE 網站
no comments 沒有評論 . 。
Read more articles on 閱讀更多文章 rodney.buike rodney.buike and 和 otherSoftware otherSoftware and 和 windows server 窗口服務器 . 。
- [+] Digg [ + ] Digg的 : Feature this article ：特徵本文
- [+] Del.icio.us [ + ] Del.icio.us : Bookmark this article ： 06條
- [+] Furl [ + ]卷 : Bookmark this article ： 06條
