Vista ARTICLES Vista的文章 TOP 50排名前50位 Spyware Virus間諜軟件病毒 Vista SOFT Vista的軟 Vista HELP Vista幫助

Check Disk (chkdsk) Runs Every Time Windows Starts磁盤檢查（ CHKDSK會）執行每一次Windows啟動

Sometimes it happens that disk check always starts to check the file system on one or more drives for consistency.有時發生的情況是磁盤檢查總是開始檢查檔案系統的一個或多個驅動器的一致性。 If any key is pressed, the disk checking is aborted.如果有任何關鍵是壓力，磁盤檢查是流產。 Actually this is because some data structure of the drive or some file is corrupted which can not be recovered and check disk is always run at Windows startup.其實，這是因為一些數據結構的驅動器或某些文件損壞而無法恢復，並檢查磁盤始終運行在Windows啟動。 Or sometimes it may take several hours for disk checking to scan all the drives.或有時可能會花費幾個小時的磁盤掃描檢查所有驅動器。 So disabling it or postponing disk check is better.因此，停用或推遲磁盤檢查更好。 There are several methods to disable disk checking at Windows startup.有幾種方法來禁用磁盤檢查， Windows啟動。 Two of them are given below:其中兩名如下：

Method 1: Using CHKNTFS utility 方法1 ：使用CHKNTFS公用事業

CHKNTFS is a utility that has been developed by Microsoft to disable disk checking on certain drives at Windows startup. CHKNTFS是一種實用工具，開發了微軟關閉檢查磁盤驅動器在某些Windows啟動。 To use this utility go to Start –> Run –> cmd .要使用此實用工具去開始“ ->運行- >”命令。

If you want to disable check disk on C: drive, use the following command on command prompt.如果你想禁用檢查磁盤C ：盤，請使用下面的命令就命令提示符。

chkntfs /XC: chkntfs /越野：

If you want to disable check disk on two or more drives, just keep on adding the drives:如果你想禁用檢查磁盤上兩個或兩個以上的硬盤，只是不斷增加的驅動器：

chkntfs /XC: D: E: chkntfs /越野： D組：電子郵件：

This will disable check disk on C, D and E drives.這將禁用檢查磁盤上C ， D和E驅動器。

If you want to restore what you have done, that is, enable automatic disk checking on all the drives again, just run the following command:如果你想恢復你做了什麼，也就是可以自動檢查磁盤上的所有驅動器再次，只需運行下面的命令：

chkntfs /D chkntfs /數

This will restore all the drives to automatic disk checkup.這將恢復所有驅動器的自動磁盤檢查。

Method 2: Using Registry 方法2 ：使用註冊表

To disable automatic disk checking at Windows startup through registry, go to the following registry key:要禁用自動磁盤檢查，通過Windows啟動註冊表，轉到以下註冊表項：

HKEY_LOCAL_MACHINE\SYSTEM HKEY_LOCAL_MACHINE \系統 \CurrentControlSet\Control \ CurrentControlSet \控制 \Session Manager \會話管理

In the right hand pane, double click BootExecute .在右邊窗格中，雙擊BootExecute 。

The default value of the key is autocheck autochk *默認值的關鍵是autocheck autochk *

* means every drive is checked for consistency. *指每一個驅動器是檢查的一致性。 Just add /K:C at the end before * .只需添加 / K ： C的年底前* 。 /K switch will disable autocheck on C: drive at Windows startup. / K開關將禁用autocheck的C ：驅動器在Windows啟動。 So the final value should look like this:因此，最後的價值看起來應該如下：