Jetzt nach der überprüfung der gesamten Vorinstallation Bestandteile, wenn wir die Einstellung wir beginnen, erhält einige Fehlermeldungen wie diese:

Einstellung traf ein Problem an, bei der Validierung des Zustandes des aktiven Verzeichnisses: Gebiet Steuerpult-Betriebssystemversion ist 5.0 (2195) Service-Satz 4. Die minimale erforderte Version ist 5.2 (3790) Service-Satz 1.

Dieses eine allgemeine Ausgabe wirklich, der Grund hinter diesem ist, daß die Einstellung alles DCs, daß sie 2003 sp1 sowie das GCs sein müssen, wegen dessen überprüft, das wir die Einstellung auf das spezifische DC 2003 zeigen müssen. Diese Ausgabe wird im Austausch 2007 sp1 geregelt. So werde ich die Einstellung in einem Automatischen Betrieb beginnen, der vorbei, beginnt den Wald vorzubereiten, indem ich vorher die erwähnten Schalter aber mit dem Spezifizieren von /dc laufen lasse: Parameter zum Punkt zum Fenster DC 2003. Die erste Sache, die wir in entfaltendem Austausch 2007 in eine Vermächtnis Austausch-Organisation tun müssen, ist zu laufen

Setup.com /PrepareLegacyExchangePermissions

•Nachher, daß wir das Schema vorbereiten müssen, kann dieses getan werden, indem man den folgenden Befehl laufen läßt

Setup.com /PrepareSchema /dc:NameofWindows2003DC

Bereiten Sie ANZEIGE vor, indem Sie den Befehl schreiben:

Setup.com /PrepareAD /dc:NameofWindows2003DC

Anmerkung: Sie können den Setup.com /PrepareAD Befehl laufen lassen, bevor Sie /PrepareLegacyExchangePermissions und /PrepareSchema laufen lassen, läßt dieses /PrepareLegacyExchangePermissions laufen und /PrepareSchema befiehlt automatisch.

Jetzt können wir die Einstellung beginnen, aber wir müssen die Einstellung in einem Automatischen Betrieb als wir beginnen sagten, indem wir ein Paar der Schalter mit dem Einstellung Befehl, abhängig von Ihren Notwendigkeiten kombinieren:

Einstellung /m: Bringen Sie /roles an: M, HT, C, M.Ü. /dc:

Bevor wir mit der Installation von Austausch 2007 begonnen erhalten, wird es empfohlen, um die neueste Version Austausch-der besten Praxis-Analysatorwerkzeuge jetzt laufen zu lassen und Austauschschnelligkeitüberprüfung 2007, in meinem Fall, das Werkzeug berichtete mir folgende wählt:

So ist meine Austauschorganisation in Misch, es muß zum gebürtigen Modus geändert werden. Im allgemeinen gibt es drei Vorbedingungen, die überprüft müssen, bevor sie Austausch 2007 anbringen, sie sind:

• Aktiver Verzeichniswald:
  • das Gebiet Funktionalität Niveau muß Windows 2000 oder Windows Bediener 2003 sein
  • the domain controller that is the schema master is running Windows Server 2003 SP1 or higher
  • the Global Catalog server is running Windows Server 2003 SP1 or higher

There are some switches that you can run them to prepare the environment by preparing the permission required for exchange 2007, preparing the schema, preparing active directory, and preparing domain. Those switches are:

Setup.com /PrepareLegacyExchangePermissions
Setup.com /PrepareSchema
Setup.com /PrepareAD
Setup.com /PrepareDomain or Setup.com /PrepareAllDomains

Note: you can run the 32-bit version of Exchange 2007 from the trial CD to prepare you environment.

• Exchange organization
  • it is a must to run the exchange organization in native mode
  • because of this all Exchange servers running Exchange 5.5 or earlier must be removed

In my case I have to change the organization mode simply by opening the exchange system manager, right click exchange organization, choose properties then choose the change mode button you will get a warning message, click yes, as simple as that.

Server requirements:

• .Net framework 2.0
• Update KB926776

Here is another great guest post from: Jason Boche, MCSE NT4/2000/2003, MCSA 2000/2003, MCP, VCPx2, CCA, A+

If you have used Compaq/HP brand server hardware, you are most likely familiar with RILOE boards (Remote Insight Lights Out Edition) and ILO boards (Integrated Lights Out). These are hardware devices that provide remote access to Compaq/HP server hardware. A key benefit is their "out of band" management attribute, meaning they operate independent of the server's native host operating system, network, and CPU. They've got their own CPU, memory, and a built in web server which listens on ports 80 and 443 and serves as the configuration and management tool. Another benefit is the encrypted traffic that passes along the wire between RILOE/ILO and the client web browser which is accessing it. By default, this traffic is passed on TCP port 443. If you've used the RILOE/ILO before, you are probably used to seeing the following all too familiar screen:

The underlying reason for this is that your client knows nothing about the certificate authority from which the certificate for the RILOE/ILO was generated, other than it is not trusted. This is no cause for alarm as long as you trust the Hewlett Packard company from Houston, TX, however, failure to address this will cost you an extra mouse click each and every time you access this or any other RILOE/ILO on your network. Considerably more harmful is the numbing effect this screen will cause for each administrator who is

This great article come from Michael Khanin (MCP, MCP+I, CNA, CNE, MCSE) who also blogs on his blog site http://TheSystemAdministrator.com

Recently there was a necessity to install a Virtual CD/DVD on many computers on the same network. And it was necessary, that the virtual CD/DVD would be set to a special letter in the system. Right now there are a lot of programs which emulate CD/DVD and can mount any CDs/DVD images, as I wished to make all installation and configuration run remotely (well laziness by me, not wanting to run from computer to computer) It was necessary for the program to install in silent mode. After a quick search I chose МagicDisc.

I've selected this program for several reasons:

1. The program is free-of-charge (but not all options work in the free-of-charge version, but what is necessary for me, works)

2. There is opportunity to run setup in silent mode.

3. It is possible to operate all necessary functions from a command line.

For a more satisfiying management experience from the command line one more file, Miso.exe is required.

The given file can be found on the МagicDisc site.

For the installation I have written a script, INSTALL-V-CD.bat.

INSTALL-V-CD.bat is very simple and contains just one line:

setup_magicdisc.exe /S

To start the script on a remote system I used psexec.exe which can be downloaded here.

After the installation of МagicDisc, it was necessary to copy miso.exe to the remote computer. It is important to note that miso.exe should be located in a directory which is registered in the system PATH.

Now the most interesting part. We create virtual a CD

Providing a Default Domain for Microsoft FTP User Authentication

Jason Boche, MCSE NT4/2000/2003, MCSA 2000/2003, MCP, VCPx2, CCA, A+

As usual, I have a story behind most of my experiences. If you’re not interested in reading about it, skip to the section “How to do it”.

I’ve been using FTP servers since I learned how to write and publish web pages in HTML – about the early to mid 1990’s. I found using an FTP client to connect to an FTP server was pretty straight forward. The three required elements to provide are a host name, a user name, and a password. Sure, there are additional parameters that can be provided such as configuring a connection through a firewall, changing ports, or providing local and remote working directories, but let’s keep it simple, because that’s what this article is about – keeping it simple for end users who are not as technical, and would like to keep it that way.

Fast forward a few years. Now I’ve got fast ADSL broadband internet connectivity, as many static IP addresses as I want through my local ISP (static IPs still weren’t a hot commodity to be cherished back then), and servers in my spare bedroom running Microsoft IIS and FTP, as well as domain controllers. I decided that I’ve got more than enough bandwidth to host some websites for friends and small businesses in the area. These customers are not technically savvy. They’ve put together a website using some do-it-yourself WYSIWYG tool