Nu na het controleren van de volledige pre-installatiecomponenten, als wij de opstelling beginnen zullen wij sommige foutenmeldingen zoals dit krijgen:

De opstelling ontmoette een probleem terwijl het bevestigen van de staat van Actieve Folder: Is de versie van het Werkende Systeem van het Controlemechanisme van het domein 5.0 (2195) Pak 4 van de Dienst. De minimum vereiste versie is 5.2 (3790) Pak 1 van de Dienst.

Dit een gemeenschappelijke kwestie eigenlijk, de reden achter dit is dat de opstelling al DCS dat zij sp1 van 2003 evenals GCs moeten zijn, wegens dat controleert wij de opstelling tot specifieke 2003 gelijkstroom moeten richten. Deze kwestie zal in uitwisselings 2007 sp1 worden bevestigd. Zo, ga ik de opstelling op een onbeheerde wijze beginnen die langs voorbereid het bos door de vermelde schakelaars eerder in werking te stellen maar met het specificeren van /dc begint: parameter om aan de vensters 2003 gelijkstroom te richten. Het eerste ding dat wij hebben moeten om in het opstellen van Uitwisseling 2007 in een Organisatie van de erfenisUitwisseling doen moet lopen

Setup.com /PrepareLegacyExchangePermissions

†¢After dat wij het schema, dit moeten voorbereiden kan worden gedaan door het volgende bevel in werking te stellen

Setup.com /PrepareSchema /dc:NameofWindows2003DC

Bereid ADVERTENTIE, door het bevel voor te typen:

Setup.com /PrepareAD /dc:NameofWindows2003DC

Nota: u kunt het Setup.com /PrepareAD bevel voordien in werking stellen

…

Alvorens wij met de installatie van Uitwisseling 2007 begonnen worden wordt het geadviseerd om de recentste versie van de hulpmiddelen van de Analysator van de Beste praktijken van de Uitwisseling in werking te stellen nu, en de bereidheidscontrole van de Uitwisseling 2007, in mijn geval te kiezen, gaf het hulpmiddel me het volgende rapport:

Zo, is mijn uitwisselingsorganisatie in gemengd, moet het in inheemse wijze worden veranderd. In het algemeen, zijn er drie eerste vereisten die gecontroleerd alvorens uitwisseling 2007 te installeren, zij zijn moeten:

• Het actieve bos van de Folder:
  • het niveau van de domeinfunctionaliteit moet vensters 2000 of de Server 2003 zijn van Vensters
  • het domeincontrolemechanisme dat de schemameester is stelt SP1 van de Server 2003 van Vensters in werking of hoger
  • de globale server van de Catalogus stelt SP1 van de Server 2003 van Vensters in werking of hoger

There are some switches that you can run them to prepare the environment by preparing the permission required for exchange 2007, preparing the schema, preparing active directory, and preparing domain. Those switches are:

Setup.com /PrepareLegacyExchangePermissions
Setup.com /PrepareSchema
Setup.com /PrepareAD
Setup.com /PrepareDomain or Setup.com /PrepareAllDomains

Note: you can run the 32-bit version of Exchange 2007 from the trial CD to prepare you environment.

• Exchange organization
  • it is a must to run the exchange organization in native mode
  • because of this all Exchange servers running Exchange 5.5 or earlier must

…

Here is another great guest post from: Jason Boche, MCSE NT4/2000/2003, MCSA 2000/2003, MCP, VCPx2, CCA, A+

If you have used Compaq/HP brand server hardware, you are most likely familiar with RILOE boards (Remote Insight Lights Out Edition) and ILO boards (Integrated Lights Out). These are hardware devices that provide remote access to Compaq/HP server hardware. A key benefit is their “out of band” management attribute, meaning they operate independent of the server’s native host operating system, network, and CPU. They’ve got their own CPU, memory, and a built in web server which listens on ports 80 and 443 and serves as the configuration and management tool. Another benefit is the encrypted traffic that passes along the wire between RILOE/ILO and the client web browser which is accessing it. By default, this traffic is passed on TCP port 443. If you’ve used the RILOE/ILO before, you are probably used to seeing the following all too familiar screen:

The underlying reason for this is that your client knows nothing about the certificate authority from which the certificate for the RILOE/ILO was generated, other than it is not trusted. This is no cause for alarm as long as you

…

This great article come from Michael Khanin (MCP, MCP+I, CNA, CNE, MCSE) who also blogs on his blog site http://TheSystemAdministrator.com

Recently there was a necessity to install a Virtual CD/DVD on many computers on the same network. And it was necessary, that the virtual CD/DVD would be set to a special letter in the system. Right now there are a lot of programs which emulate CD/DVD and can mount any CDs/DVD images, as I wished to make all installation and configuration run remotely (well laziness by me, not wanting to run from computer to computer) It was necessary for the program to install in silent mode. After a quick search I chose ÐœagicDisc.

I’ve selected this program for several reasons:

1. The program is free-of-charge (but not all options work in the free-of-charge version, but what is necessary for me, works)

2. There is opportunity to run setup in silent mode.

3. It is possible to operate all necessary functions from a command line.

For a more satisfiying management experience from the command line one more file, Miso.exe is required.

The given file can be found on the ÐœagicDisc site.

For the installation I have written a script, INSTALL-V-CD.bat.

INSTALL-V-CD.bat is very simple and contains just one line:

setup_magicdisc.exe /S

To start the script on a remote system I

…

Providing a Default Domain for Microsoft FTP User Authentication

Jason Boche, MCSE NT4/2000/2003, MCSA 2000/2003, MCP, VCPx2, CCA, A+

As usual, I have a story behind most of my experiences. If you’re not interested in reading about it, skip to the section “How to do it�.

I’ve been using FTP servers since I learned how to write and publish web pages in HTML – about the early to mid 1990’s. I found using an FTP client to connect to an FTP server was pretty straight forward. The three required elements to provide are a host name, a user name, and a password. Sure, there are additional parameters that can be provided such as configuring a connection through a firewall, changing ports, or providing local and remote working directories, but let’s keep it simple, because that’s what this article is about – keeping it simple for end users who are not as technical, and would like to keep it that way.

Fast forward a few years. Now I’ve got fast ADSL broadband internet connectivity, as many static IP addresses as I want through my local ISP (static IPs still weren’t a hot commodity to be cherished back then), and servers in

…