Теперь после проверять все компоненты pre-installation, если мы начинаем установку мы, то получит некоторые сообщения ошибки such as это одно:

Установка столкнулась проблема пока утверждающ положение активно директории: Вариант оперативной системы регулятора домена 5.0 (2195) пакета 4 обслуживания. Минимальный необходим вариант 5.2 (3790) пакета 1 обслуживания.

Это общий вопрос фактическ, причина за этим что установка проверяет все DCs что они должны быть 2003 sp1 также, как GCs, из-за того, котор мы должны указать установка к специфически dc 2003. Этот вопрос будет зафиксирован в обмене 2007 sp1. Так, я иду начать установку в unattended режиме начиная мимо подготовить пущу путем бежать упомянутые переключатели ранее но с определять /dc: параметр к пункту к DC 2003 окон. Первая вещь, котор нам нужно сделать в раскрывая обмене 2007 в организацию обменом legacy должна побежать

Setup.com /PrepareLegacyExchangePermissions

¢After€ что мы должны подготовить схиму, это â может быть сделано путем бежать following команда

Setup.com /PrepareSchema /dc:NameofWindows2003DC

Подготовьте ОБЪЯВЛЕНИЕ, путем печатать команду на машинке:

Setup.com /PrepareAD /dc:NameofWindows2003DC

Примечание: вы можете побежать команда Setup.com /PrepareAD раньше

…

Прежде чем мы получаем начатыми с установкой обмена 2007 порекомендованы, что бежит самый последний вариант инструментов анализатора практики обменом самых лучших теперь, и выбирает проверку 2007 готовности к обменом, в мой случай, инструмент дало мне following рапорт:

Так, мою организацию обменом находится в смешанном режиме, ем необходимо изменить к родному режиму. In general, 3 предпосылки после того как они проверены перед устанавливать обмен 2007, они являются следующими:

• Активно пуща директории:
  • уровнем функциональности домена должен быть окнами 2000 или сервером 2003 Windows
  • регулятор домена будет оригиналом схимы бежит сервер 2003 SP1 Windows или более высоко
  • глобальный сервер каталога бежит сервер 2003 SP1 Windows или более высоко

There are some switches that you can run them to prepare the environment by preparing the permission required for exchange 2007, preparing the schema, preparing active directory, and preparing domain. Those switches are:

Setup.com /PrepareLegacyExchangePermissions
Setup.com /PrepareSchema
Setup.com /PrepareAD
Setup.com /PrepareDomain or Setup.com /PrepareAllDomains

Note: you can run the 32-bit version of Exchange 2007 from the trial CD to prepare you environment.

• Exchange organization
  • it is a must to run the exchange organization in native mode
  • because of this all Exchange servers running Exchange 5.5 or earlier must

…

Here is another great guest post from: Jason Boche, MCSE NT4/2000/2003, MCSA 2000/2003, MCP, VCPx2, CCA, A+

If you have used Compaq/HP brand server hardware, you are most likely familiar with RILOE boards (Remote Insight Lights Out Edition) and ILO boards (Integrated Lights Out). These are hardware devices that provide remote access to Compaq/HP server hardware. A key benefit is their “out of band” management attribute, meaning they operate independent of the server’s native host operating system, network, and CPU. They’ve got their own CPU, memory, and a built in web server which listens on ports 80 and 443 and serves as the configuration and management tool. Another benefit is the encrypted traffic that passes along the wire between RILOE/ILO and the client web browser which is accessing it. By default, this traffic is passed on TCP port 443. If you’ve used the RILOE/ILO before, you are probably used to seeing the following all too familiar screen:

The underlying reason for this is that your client knows nothing about the certificate authority from which the certificate for the RILOE/ILO was generated, other than it is not trusted. This is no cause for alarm as long as you

…

This great article come from Michael Khanin (MCP, MCP+I, CNA, CNE, MCSE) who also blogs on his blog site http://TheSystemAdministrator.com

Recently there was a necessity to install a Virtual CD/DVD on many computers on the same network. And it was necessary, that the virtual CD/DVD would be set to a special letter in the system. Right now there are a lot of programs which emulate CD/DVD and can mount any CDs/DVD images, as I wished to make all installation and configuration run remotely (well laziness by me, not wanting to run from computer to computer) It was necessary for the program to install in silent mode. After a quick search I chose ÐœagicDisc.

I’ve selected this program for several reasons:

1. The program is free-of-charge (but not all options work in the free-of-charge version, but what is necessary for me, works)

2. There is opportunity to run setup in silent mode.

3. It is possible to operate all necessary functions from a command line.

For a more satisfiying management experience from the command line one more file, Miso.exe is required.

The given file can be found on the ÐœagicDisc site.

For the installation I have written a script, INSTALL-V-CD.bat.

INSTALL-V-CD.bat is very simple and contains just one line:

setup_magicdisc.exe /S

To start the script on a remote system I

…

Providing a Default Domain for Microsoft FTP User Authentication

Jason Boche, MCSE NT4/2000/2003, MCSA 2000/2003, MCP, VCPx2, CCA, A+

As usual, I have a story behind most of my experiences. If you’re not interested in reading about it, skip to the section “How to do it”.

I’ve been using FTP servers since I learned how to write and publish web pages in HTML – about the early to mid 1990’s. I found using an FTP client to connect to an FTP server was pretty straight forward. The three required elements to provide are a host name, a user name, and a password. Sure, there are additional parameters that can be provided such as configuring a connection through a firewall, changing ports, or providing local and remote working directories, but let’s keep it simple, because that’s what this article is about – keeping it simple for end users who are not as technical, and would like to keep it that way.

Fast forward a few years. Now I’ve got fast ADSL broadband internet connectivity, as many static IP addresses as I want through my local ISP (static IPs still weren’t a hot commodity to be cherished back then), and servers in

…