Esconda todos os ícones Desktop

Você pode esconder todos os ícones desktop a maneira fácil direito-estalando o Desktop, e artigos do Desktop da mostra do uncheck.

Sendo o guy nitty, gritty que eu sou, eu aprecío procurar soluções aos problemas ou non-problemas, tais como procurar o tweak do registro equivalente a funções como escondendo os ícones desktop e aqui está.

• Estale o Orb do começo
• No campo do funcionamento ou da busca, datilografe Regedit
• Em cima de lançar Regedit, Navigate a esta chave

HKCU \ software \ Microsoft \ Windows \ CurrentVersion \ explorador \ HideDesktopIcons \ NewStartPanel

• Na direito-placa, críe um REG_DWORD novo {00000000-0000-0000-0000-000000000000}
• o Dobro-clique {00000000-0000-0000-0000-000000000000} e ajustou-o é valor a 1

Crescimento, você é feito!

Para undo as mudanças, para repetir acima as etapas e para mudar ou ajustar o valor de {00000000-0000-0000-0000-000000000000} a um valor de 0.

Esconda seu dobrador do público de Windows Vista

• Estale o Orb do começo
• No campo do funcionamento ou da busca, datilografe Regedit
• Em cima de lançar Regedit, Navigate a esta chave

HKLM \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ explorador \ HideDesktopIcons

• Certifique-se de também que \ HideDesktopIcons tenha dois subfolders
• -- ClassicStartMenu (temas non-Aero dos controles)
• -- NewStartPanel (gráficos Aero dos controles)
• -- Registro HideDesktopIcons
• Se um dword chamado {4336a54d-038b-4685-ab02-99bb52d3fb8b} existir em NewStartPanel, a seguir mude simplesmente seu valor ao hexadecimal.
• Se não houver nenhum dword chamado {4336a54d-038b-4685-ab02-99bb52d3fb8b} existe em NewStartPanel, a seguir cría um
  Com o NewStartPanel na placa esquerda, o direito-clique na placa direita, novo seleto, então bocado de DWORD 32, nomeia o valor: {4336a54d-038b-4685-ab02-99bb52d3fb8b} (adicione os suportes Curly demasiado)
• -- Para esconder o dobrador público no desktop, ajuste o valor do dword = 1.
• -- Indicar o dobrador ajustou o dword = 0.

Usando estes toolbars no lado de seu desktop e combo com função automóvel-escondendo, pode fazer sua vida mais fácil com estes atalhos e seus apps favoritos são lançados fàcilmente deste toolbar.
Deixe-nos assim começar…

Em Windows Vista

Go to the explorer and create a folder you can create a folder anywhere it doesn’t matter where but for the sake of quick recall I suggest you create the folder on your My Documents folder and you can name whatever you like for this tip I will name the folder SAMPLEFOLDER.

Drag your newly created folder to the side of your desktop or on the top of your screen for it to dock on either in the side or in the top or which ever you dragged the folder you created to.

Right-click the folder and pick Toolbars, that is where you select any toolbar that is ready to use within the system. In our sample tip try selecting the Quick Launch Toolbar.

Remove the folder that we created by right-clicking on the toolbar and choosing Toolbars and then removing the selection for the folder name SAMPLEFOLDER if that’s the name you used too.
Now you can also have the option to show

…

Here’s how you can use your printer that is shared on your home network.

• Click Start Orb
• Click Control Panel
• Click Network and Internet
• Click Network and Sharing Center
• Click on Sharing and Discovery
• Click the drop down arrow on Password protected sharing and turn off the password protected sharing and then click Apply
• If you are suddenly prompted by the UAC just click continue and proceed with your life
• Click the drop down arrow next to Printer sharing Turn on printer sharing click Apply
• If you are suddenly prompted by the UAC just click continue and proceed with your life

After the setup you can now proceed to printing it over the network.

• Click the Start Orb
• In the search bar type \\name_of computer_with_shared_printer, and press the Enter key
• If typed correctly Vista will open the folder for that shared computer. Double click the Printers icon then Double left click the shared printer icon so that Vista will automatically install the printer drivers

There comes a time in your life when something goes wrong, and that you can’t connect to server, well sometimes good it’s best if you know the basics in troubleshooting it. And yes it is really easy if you right-click on a network connection in your Networking Connections folder or the connection icon in your system notification area, but ain’t it fun if you know the basic troubleshooting steps.
Open your command Prompt

• Type ipconfig to check and take note of your IP address, subnet mask, and default gateway write them down if possible
• Using the values, the ipconfig gave you, use the Ping command
• Ping 127.0.0.1 to see if your network adapter is working.

• So on the command prompt : ping 127.0.0.1

now we can proceed to the repair itself ( if you want to do it manually)

• To renew the DHCP : ipconfig /renew
• To flush ARP Cache : arp –d *
• to flush NetBIOS Cache : nbtstat –R
• to flush DNS Resolver Cache : ipconfig /flushdns
• Register the WINS : nbtstat –RR
• Register the DNS :  ipconfig /registerdns

Those are

…

Connecting to a wireless network is fairly easy in Windows Vista much easier than Windows XP but there maybe a bit confusion as Vista has a different naming convention than XP that we got so used to.

A cool thing in Windows Vista is that you can detect a non-broadcasting wireless network or a hidden SSID and you can configure it to be your preferred network. Cool huh… right.

First of all, turn on the wireless adapter…

• On the Start Orb -> click on “Connect To”
• A window will pop up and show all available connections (dial-up, VPN and wireless)
• Pick wireless connection -> click the “Connect”
• If you’re trying to connect to a security-enabled network, well that would require authentication (so I assume you have a network key which is either WEP or a WPA or a WPA2 encryption key)
• Now when all info are enterd and done correctly it will show up as connected
• Also you can modify the connection settings of the wireless network :
• right click on the connected wireless network and choose “Properties”

For a more secure network on your home network it’s better to Use WPA to secure your Wi-Fi.