Many times you would have encountered an annoying pop-up window many times, which notifies you that you are running on low virtual memory, and Windows is trying to increase it.很多次，你会遇到一个恼人的弹出式窗口了很多次，其中通知您上正在运行的低虚拟内存和Windows是设法增加。 If it happens once in a while, then its OK.如果一旦发生在了一阵子，然后再确定。 Nothing to worry about.没有什么担心。 But if it happens repeatedly, then you need to take action, because now it has started affecting the performance of your PC.但如果它发生多次，那么你就需要采取行动，因为现在它已经开始影响到您电脑的效能。

How to optimize Virtual memory in Windows XP如何优化虚拟内存在Windows XP
A few simple steps.几个简单的步骤。

1.Open Control Panel > System. 1.open控制面板“ >制度。
2.Click on Advanced tab.点击[先进的标签。
3.Click the Settings button in the Performance panel. 3 。点击设置按钮，在小组的表现。
4.Click the Advanced tab. 4.click高级选项卡。
5.Click the Change button in the Virtual memory panel. 5.click改变按钮，虚拟记忆体面板。
6.Now, you have two options. 6.now ，您有两个选项。 If you exactly about your system, you can choose the size of the virtual memory, otherwise select the System managed size option.如果您正是您的系统，您可以选择大小的虚拟内存，否则选择系统管理的大小选择。 It is safe.它是安全的。

Sometimes it happens that disk check always starts to check the file system on one or more drives for consistency.有时刚巧磁盘检查总是开始检查档案系统的一个或多个驱动器的一致性。 If any key is pressed, the disk checking is aborted.如有的话，关键是压力，磁盘检查是胎死腹中。 Actually this is because some data structure of the drive or some file is corrupted which can not be recovered and check disk is always run at Windows startup.其实这是因为有些数据结构的驱动器或一些文件已损坏，不能恢复和磁盘检查是始终运行在Windows启动。 Or sometimes it may take several hours for disk checking to scan all the drives.或有时可能需要几个小时的磁盘检查，以扫描所有驱动器。 So disabling it or postponing disk check is better.因此，停用或暂缓磁盘检查是更好。 There are several methods to disable disk checking at Windows startup.有几种方法来禁用磁盘检查在Windows启动。 Two of them are given below:他们两人是如下：

Method 1: Using CHKNTFS utility 方法1 ：使用chkntfs公用事业

CHKNTFS is a utility that has been developed by Microsoft to disable disk checking on certain drives at Windows startup. chkntfs是一种实用工具，已经由Microsoft开发，以禁用磁盘检查对某些驱动器在Windows启动。 To use this utility go to Start –> Run –> cmd .要使用此实用工具去“开始->运行- >” c m d。

If you want to disable check disk on C: drive, use the following command on command prompt.如果您要停用检查磁盘上C ：驱动器，使用下面的命令就命令提示符。

chkntfs /XC: chkntfs /越野：

If you want to disable check disk on two or more drives, just keep on adding the drives:如果您要禁用的磁盘检查对两个或两个以上的硬盘，只是不断地加入驱动器：

chkntfs /XC: D: E: chkntfs /越野：国内：电邮：

This will disable check disk on C, D and E这将禁用所有内容在磁盘上C ， D和E

...

Microsoft’s Error Reporting in windows sometimes is disturbing, most of us don’t want to send that error report because it’s of no use.微软的错误报告在Windows有时令人不安的是，我们大多数人不想发送错误报告，因为它是没有用的。 Even I am fed up of this stupid error pop up every time.即使我厌倦了这种愚蠢的错误弹出的每一次。 There’sa easy way to disable Microsoft error report in windows.有简单的方法来禁用Microsoft错误报告在Windows 。

Disable Microsoft Error report in Windows XP: 禁用Microsoft错误报告在Windows XP ：

1- Open Control Panel (Start > Control Panel) 1 -打开控制面板（开始> “控制面板）

2- Open the Problem Reports & Solutions applet Under advanced options and disable error reporting. 2 -开放问题的报告与解决方案A pplet的进阶选项]下的和禁用错误报告。

Disable Microsoft Error report in Windows Vista: 禁用Microsoft错误报告在Windows Vista中：

1- Right click on my computer (Desktop) and click properties 1 -上按一下滑鼠右键我的电脑（台式机）并点击属性

2- Click the Advanced Tab 2 -单击高级选项卡

3- You’ll see a “Error reporting” button at the bottom, click it 3 -您会看到一个“错误报告”按钮，在底部，单击它

4- Select Disable Error Reporting 4 -选择禁用错误报告

And you’re done.即可大功告成。

Normally when you want to access the Disk Cleanup tool, you usually have to either find it through the start menu, or open up the drive properties window.通常当您要访问的磁盘清理工具，你通常有要么找到它通过开始菜单，或打开驱动器属性窗口。 Instead of going through all that, we can use a simple registry hack to add a menu item to the drive right-click menu.不是经历的一切，我们可以使用一个简单的注册表开刀，以添加一个菜单项的驱动器右键点击菜单。

Using the Hack 使用技巧

After installation, you can simply right-click on a drive and choose "Disk Cleanup" from the menu:安装完毕后，您可以简单地右键点击驱动器并选择“磁盘清理”从菜单中：

If you are using Windows Vista, you'll be asked whether you want to clean up your files or all files…如果您使用的是Windows Vista ，您将被询问您是否要清理您的档案或全部档案…

And then disk cleanup will begin:然后磁盘清理将开始：

Manual Registry Hack 手册注册表开刀

Open up regedit through the start menu search or run box, and then browse down to the following key:开放regedit通过开始菜单搜索或运行框中，然后浏览到以下项：

HKEY_CLASSES_ROOT\Drive\shell hkey_classes_root \驱动器\壳牌

Create a new key called "diskcleanup" and set the default value to "Disk Cleanup".创建一个新的关键的所谓“ diskcleanup ” ，并设置默认值“磁盘清理” 。 Then create another key underneath it called "command" and set the value to the following:然后创建另一个关键下，所谓的“指挥”和值设置为以下几点：

cleanmgr.exe /d %1 cleanmgr.exe / ％ 1

The change should be immediate, just right-click on the drive and you should变化应立即，只需右键单击该驱动器，您应该

...

Most programs written for Windows XP also work in this version of Windows, but some older programs might run poorly or not at all.大多数程序的书面为Windows XP还工作在这个版本的Windows ，但有些较旧的程序可能运行不佳或没有在所有。 If a program written for an earlier version of Windows doesn’t run correctly, use the Program Compatibility Wizard to change the compatibility settings for the program.如果某个程序的书面为Windows的早期版本不正确运行，使用程序兼容性向导改变兼容性设置为程序。 To change settings for a program manually, use the individual program’s Compatibility tab.要改变设定一个程序，手动，使用单个程序的兼容性选项卡。

If changing the settings does not fix the problem, go to the program manufacturer’s website to see if there is an update for the program.如果更改设置不能解决问题，转到该程序制造商的网站，看看是否有更新的程序。

Do not use the Program Compatibility Wizard on older antivirus programs, disk utilities, or other system programs because it might cause data loss or create a security risk. 不使用程序兼容性向导对老年人的防病毒程序，磁盘实用工具，或其他系统程序，因为这可能导致数据丢失或创建一个安全风险。

Run the Program Compatibility Wizard 运行程序兼容性向导

1. 1 。 Open the Program Compatibility Wizard by clicking the Start button , clicking Control Panel, clicking Programs, and then clicking Use an older program with this version of Windows.开放的程式相容性精灵按一下开始按钮，点击控制面板，点击程序，然后点击使用较旧的程序与此版本的Windows 。

2. 2 。 Follow the instructions in the wizard.依照精灵的指示。

If you cannot install a program, insert the installation disc for the program and, using the wizard, browse to the program’s setup file, usually called Setup.exe, Install.exe, or something similar.如果您无法安装一个程序，插入安装光盘，为计划和，使用向导，浏览到该程序的安装文件，通常所谓的Setup.exe ， install.exe ，或类似的。 The wizard is not designed to work on programs that have精灵不是设计来的工作程序，有

...

• Install Windows Vista as normal on a 20 GB or above space NTFS hard disk drive partition.After installing Vista don't install anything like device driver's, programs and other updates on this Windows Vista because Microsoft gives you then Machinekeynumbers, that cant be copied with the Windows Explorer.安装Windows Vista ，作为一个正常的20 GB或以上的空间NTFS的硬盘驱动器partition.after Vista的安装不安装任何软件一样，设备驱动程序的，程序和其他更新就这个Windows Vista的，因为微软给您，然后machinekeynumbers ，即cannot复制与Windows档案总管。
  
• Boot the same Windows Vista installed computer using another hard disk contains Windows XP operating system or use an USB connected external hard disk drive to boot.开机同时安装Windows Vista电脑上用另一个硬碟包含Windows XP作业系统或使用的USB连接外部硬盘驱动器启动。 The hard disk with installed Windows Vista stays connected.硬盘与安装Windows Vista中停留的连接。
• Copy all the files and folders from that Windows Vista installation to a folder called Vista32.复制所有文件和文件夹从Windows Vista安装到一个文件夹中所谓的vista32 。 Don't paste the copied Vista32 folder on the same partition with Windows Vista, because this partition is deleted later in this tweak.不贴复制vista32文件夹相同的分区与Windows Vista ，因为这是分区删除后，在这方面的调整。 Also make sure that in folder options all the system files are set visible like hiberfil.sys, pagefile.sys, System Volume Information.同时确保在文件夹选项所有系统文件设置的有形一样， hiberfil.sys ，的Pagefile.sys ，系统卷的资料。
• When you get a message, that a file cant be copied, use the program Beyond Compare 2当你得到一个信息，一个档案cannot被复制，使用该程序无法比拟的2

...